Frequently Asked Questions for Original Sanidoor Unit

How long does a typical installation take?

2 hours

What kind of doors can be fitted with a Sanidoor?

Swinging doors only. Original Sanidoor is best for high traffic areas. The unit is to be mounted above the door frame on the swing side of the door and requires a 10” overhead space for placement.

What type of power is required?

Sanidoor operates on 110V at 1.6 amps therefore does not require a dedicated breaker, but it is hardwired

What if there is a power outage?

No problem, Sanidoor can always be used in manual mode

What needs to be done prior to installation?

Before installation confirm that a solid mounting substrate is available to anchor the Sanidoor and 120 VAC power is available at the mounting location from the building wiring. Note: It is recommended that the mounting surface be reinforced by a 2x12” header. The Sanidoor power requirements are 120 VAC +10% -15%, 50/60 Hz, 2 A.

How much does a Sanidoor unit weigh?

27 lbs

What is the warranty on the Sanidoor?

1 year limited warranty